I recently deployed a WR31 gateway, and after finally getting the ovpn client to connect (tried over and over to do this remotely through remotemanager, but there is a parameters mismatch that exists and it will not work, I found out after many wasted hours) I got it to connect when I entered the client tunnel settings through the gateway itself... However, it constantly reboots the gateway without warning, randomly but consistantly... it seems to mostly be caused when I plug in my IP camera and try to access the camera through the tunnel. I saw an earlier message about ovpn cpu issues causing a reboot, but it seemed it was fixed later in firmware 6x.... Any idea what I might be experiencing here? There is nothing in the logs, other than the gateway completely resets itself over and over.