How do I remotely control the state of the I/O ports on my WR31 device?

Question

I need to establish a remote connection via the internet and read/write the state of the I/O ports. I have a static IP for the WR31.

Thanks!

Answer 1

Download and read the PDF, named:
"TransPort WR31 Analog and Digital Input/Output Interface User Guide"
http://ftp1.digi.com/support/documentation/90001489.pdf

For more information and Python code examples for using the TransPort WR31 analog and digital I/O interface, visit
https://github.com/digidotcom/transport_examples

Comments

This doesn't answer my question. It appears the transport_examples have to be ran from the DIGI WR31 device itself. I need to remotely read/write the I/O.

How to I do this remotely?

---

Via telnet just like doing in the WR31 via CLI, just tried it on my WR31 works as expected.

It can be also done through a SMS message if the SMS settings are setup correctly too...

Copied from the telnet window:
_________________________________________________
Remote Connection.

Username: root
Password: **********
SN:xxxxxx
Welcome. Your access level is SUPER

ssxxxxxx>gpio ain voltage
A0: voltage=13.7293 V
OK

ssxxxxxx>
___________________________________________________