Hello, i working with a Digi Xbee 3.0 MMT device and i just had a trouble with communication and consist on the following:
1) the host Xbee attach to mi PC discover the remote one, and can read all of their configuration
2) i can write some parametters like Baud rate (BD),MicroPython Auto start (), D0, D1, D2, D3, D4, D5.
3) But other parametters like D8 NA, and SPI interface don't let change the default Option
the error message said:
"Error writing the following AT parameters
-P5: Invalid parameter"
And so on with P5,P6 P7 P8 and P9 pins
4) i Previously tried a MicroPython script on the host xbee with each of the SPI Pins and it worked fine, but i flash this same script on the xbee remote's file system and don't work.
the configuration on each xbee (host and remote )are the same:
Product Family: XB3-24.
Function Set: Digi Xbee Zigbee 3.0.
Firmware Version: 1007.
Thanks in advance.
Link to the video where you see what I just described