Home/Support/Support Forum/ConnectPort TS - RTS/CTS pins inactive?
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

ConnectPort TS - RTS/CTS pins inactive?

0 votes
I have configured the serial settings for an RS232 device on a ConnectPort, but it doesn't talk when I netcat to the connectport. I looked at <connectport>/admin/sysinfo/serial_stats.html?<port#> and see that only the CTS signal is high. I think this signal is set by the ConnectPort, not the device. Is the problem just that the two are not connecting, electrically?

Flow Control is also CTS, but I need RTS/CTS. I set it to "Hardware" in the GUI and the mode is serial bridging - is there a different method I need to use?
asked Dec 10, 2019 in ConnectPort TS by bdube New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
This would likely involve more in depth troubleshooting. Please open support case by sending an email to tech.support@digi.com
Please provide details on specific problem, product, and serial number
answered Dec 12, 2019 by ronk Seasoned Professional (206 points)