Home/Support/Support Forum/How can i use Digi Transport WR31 as a Modbus Gateway
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

How can i use Digi Transport WR31 as a Modbus Gateway

0 votes
I have done all the configurations but no solution at all.
I have 2 computers connected to the Digi Transport, one is connected serially with DB9 to the serial interface and the other is connected to ethernet0 interface, i am using a modbus poll on one computer with the ethernet interface to poll data from the other computer connected serially and has a modbus slave software running on it but i have not been able to connect.

Basically what i want to achieve after this test is to connect a flow computer to the digi transport interface and poll modbus data from a computer through gsm internet connection.

i need help badly.
asked Feb 6 in Digi TransPort Cellular by joenwa New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
Hello Joenwa,

Here is the documentation to use the Digi WR as a Modbus gateway:
https://www.digi.com/resources/documentation/digidocs/90001019/default.htm#tasks/t_configure_modbus_gateway.htm?Highlight=modbus

If you still cannot get the device working after running through that please submit a case to us by emailing tech.support@digi.com and we will be happy to assist.

During submission, please include your serial number and a copy of the debug.txt file for analysis.
https://forms.na1.netsuite.com/app/site/hosting/scriptlet.nl?script=457&deploy=2&compid=818164&h=5928a16f2b6f9582b799&articleid=1622

James
Digi Technical Support Engineer
answered Feb 7 by digi.jpac Community Contributor (67 points)
...