Xbee3 micropython GPIO interrupt

Question

Hi,

Will have Xbee3 in micropython implemented interrupt on GPIO? I need continuously calculate the raising edge on GPIO. Polling is unuseable.

Answer 1

Is any progress with the implementation of GPIO interrupts in the micropython library?

Answer 2

MVUT,

yes, I looked, but GPIO interrupt doesn't exist.

Therefore, I ask if there is any possibility that the GPIO interrupt be added to the new version of micropython. In the examples was only a pooling method. Micropython for xbee3 is very limited.

Answer 3

Viteka,

Have you looked at what is offered in the examples located https://www.digi.com/support/productdetail?pid=5674&type=documentation

Digi Support

Answer 4

Hi! Any update on this?

```
>>> from machine import Pin
>>> p4 = Pin("D4", Pin.IN, Pin.PULL_UP)
>>> p4.irq(lambda p:print(p))
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
AttributeError: 'Pin' object has no attribute 'irq'
>>> help(p4)
object Pin(Pin.board.D4, mode=Pin.IN, pull=Pin.PULL_UP) is of type Pin
init -- <function>
value -- <function>
off -- <function>
on -- <function>
toggle -- <function>
name -- <function>
names -- <function>
af_list -- <function>
mode -- <function>
pull -- <function>
af -- <function>
mapper -- <classmethod>
dict -- <classmethod>
board -- <class 'board'>
DISABLED -- 15
IN -- 0
OUT -- 1
OPEN_DRAIN -- 17
ALT -- 2
ALT_OPEN_DRAIN -- 18
ANALOG -- 3
PULL_UP -- 1
PULL_DOWN -- 2
AF0_COMMISSION -- 0
AF1_SPI_ATTN -- 1
AF2_SPI_SCLK -- 2
AF3_SPI_SSEL -- 3
AF4_SPI_MOSI -- 4
AF5_ASSOC_IND -- 5
AF6_RTS -- 6
AF7_CTS -- 7
AF7_RS485_ENABLE_LOW -- 71
AF7_RS485_ENABLE_HIGH -- 135
AF8_SLEEP_REQ -- 8
AF9_ON_SLEEP -- 9
AF10_RSSI -- 10
AF12_SPI_MISO -- 12
AF13_DOUT -- 13
AF14_DIN -- 14
AF15_SPI_MISO -- 15
AF16_SPI_MOSI -- 16
AF17_SPI_SSEL -- 17
AF18_SPI_SCLK -- 18
AF19_SPI_ATTN -- 19
>>>
```