Why my end node only connects if my coordinator is set to the Extended Pan ID 2015?
The configuration of the End Node Extended Pan ID is set to 0, i.e., it will join any network that is open to be joined.
If I set the coordinator the Extended Pan ID to 2010, check the OP, it's set 2010. Then I restart the End node, it never connects. I can see through two ways it doesn't connect, from the AI parameter (0x27) and from the Serial Monitor, if I try to send a message it gives me the error: 22 (Not joined to network)
If I change the coordinator Extended Pan ID to 2015, check the OP, it's set to 2015. Then I restart the End node, it connects right away. I can see through two ways it connects, from the AI parameter (0x0) and from the Serial Monitor, Modem Status 02 (Device associated).
Anybody know why this is happening? What if I have to set two different XBee networks with different Extended PAN IDs?
- The devices are in the last firmware 1009
- Both devices are Digi XBee Zigbee 3.0