Home/Support/Support Forum/Does ME 9210 jumpstart kit support connect ME?
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Does ME 9210 jumpstart kit support connect ME?

0 votes
Hi,
I'm wondering if Connect ME 9210 Jumpstart kit (P/N DC-ME-9210-NET) supports Connect ME (P/N DC-ME-01T-C)?
Regards
Petri
asked Apr 3 in NET+OS by phy123 New to the Community (4 points)

Please log in or register to answer this question.

1 Answer

0 votes
 
Best answer
Yes the DC-ME-01T-C is configurable unit and it support NET+OS which is what the (P/N DC-ME-9210-NET) kit supports.
answered Apr 3 by Campbell Veteran of the Digi Community (671 points)
selected Apr 3 by phy123
OK, thanks. That actually clarifies my question.
One further thing came to my mind. DC-ME-01T-C doesn't have JTAG, can I develop my customized FW and upload it to this device using jumpstart kit ?
If you already have the program in flash like FTP Server File System Sample loaded into the unit you can just ftp the image.bin file into the unit.  Usually unit ships with this option already.  You can hook up the serial com1 port to see what ipaddress the unit acquired from DHCP server.  If you do not have the FTP Server File System Sample installed in flash then you can use the Knowledgebase article on Digi's website.
https://www.digi.com/support/knowledge-base/how-to-recover-a-digi-connect-wi-me-9210-wi-em-and
Thanks. That link really helped me to figure out how set all the settings in tftpd. However, I'm still lost in using plug'n'play firmware. I started a new question:
https://www.digi.com/support/forum/73171/connect-me-plugn-play-fw-configuration
...