Home/Support/Support Forum/How to use the small oled display using ssd1306
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

How to use the small oled display using ssd1306

0 votes
Hi guys,

Thanks for your help in advance.

I am developing my own custom board using CC6UL and almost IO are working well.
So, these days I am trying to connect peripherals,
At this time SSD1306 is my subject.
I have already adopted some other I2C sensors, however, this kind of display IC are different since all sources are using a specific library like PIL or pillow for RaspPi and framebuf for Micropython.
So I can't modify these for my custom OS.
Do you have any solution for it?
here's the link for it:https://github.com/adafruit/Adafruit_Python_SSD1306

Best regards,
asked Apr 7 in Linux by WaveSim New to the Community (5 points)

Please log in or register to answer this question.

1 Answer

0 votes
if you have sources you should be able to cross-compile the library using Digi toolchain for cc6ul, which you can either generate yourself or use a rebuild one form cc6ul support page.
answered Apr 7 by LeonidM Veteran of the Digi Community (3,556 points)
...