Home/Support/Support Forum/Send and receive failed
New and improved user forum site going live on 12/6 (All users will need to reset their password when the new forum is active)

Send and receive failed

0 votes
I have a XTP9B-DPS-001 board, and although it is properly connected to XCTU software, its transmitter is damaged. I replaced the ADF 7023 transceiver, but it still doesn't send or receive data. Is this transceiver model modified for the module or is it something else?
asked May 27, 2020 in XTend by christopher New to the Community (1 point)

Please log in or register to answer this question.

2 Answers

0 votes
If your module is no longer functioning, you will need to replace it. Simply switching out components is not advisable as this can cause other damaged to the module or cause the module to be out of specifications.
answered May 27, 2020 by mvut Veteran of the Digi Community (15,515 points)
0 votes
in fact, We are a team in i research laboratory .
we are analyzing the spectra of XBEE modules, we noticed an unusual thing is happening. According to the ADF7023 PACKET MODE , the received signal does not match the transceiver . initially conceived possible damage and tried to replace the ADF7023 , but the problem did not go away.Is the format and packets provided by the module datasheet different from the ADF7023 structure?
answered May 28, 2020 by christopher New to the Community (1 point)