Home/Support/Support Forum/Connect Xbee Modules to Digi Remote Manager
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Connect Xbee Modules to Digi Remote Manager

0 votes
Dear all,

Good day.

I'm currently doing a IOT Project using Xbee 3.0 modules, Digi Xbee Gateway and Digi Remote Manager.
I managed to add all the XBee devices and Xbee Gateway to the Digi Remote Manager. Also, the Xbee gateway successfully connected to the Digi Remote Manager.

However, I failed to connect the Xbee Devices to the remote manager. I tried the connection strategies suggested in the user manual (https://www.digi.com/resources/documentation/digidocs/90001436-13/default.htm#tasks/t_set_up_device_connection_strategy.htm%3FTocPath%3DDevice%2520management%7CConnect%2520and%2520disconnect%2520devices%7C_____1);
However, I failed to access the "Advanced Configuration".

May I know is there any other solutions to connect the Xbees devices with the remote manager?

Thanks a lot.
asked Jul 1 in Device Manager by MavisLee New to the Community (4 points)

Please log in or register to answer this question.

1 Answer

+1 vote
Mavis,

This is the wrong part of the manual. You need to be looking at https://www.digi.com/resources/documentation/digidocs/90001436-13/default.htm#concepts/c_xb_networks.htm%3FTocPath%3DXBee%2520networks%7C_____0
answered Jul 1 by mvut Veteran of the Digi Community (12,756 points)
Hi Mvut,

Thanks a lot for the reply.

However, in order for me to enable the remote connection of Xbee modules in the remote manager, which settings that should I change?
Can you give me some suggestions?

Thanks a lot.
There are no settings on the XBee gateway or XBee S2C or XBee 3 modules to enable the remote manager. The XBee modules are loaded into the Remote manager via the discover function in the Gateway and populated under the XBee network tab.
...