Home/Support/Support Forum/ConnectPort/RealPort connected but not transmitting data
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

ConnectPort/RealPort connected but not transmitting data

0 votes
The ConnectPort is configured as RealPort and in my device manager (as well as Docklight to test):
Port 1 == COM1
Baud == 19200
Parity == None
DataBits == 8
StopBits == 1

Using an ethernet cable from my PC to the ConnectPort I am able to access the WebUI. The intention is to use it locally so one connection to my PC works as 16 connections, it doesn't need to be over the network.

What is interesting is I can open a serial connection to COM1 with Docklight. Command is sent with no errors but no data is returned and does not make it to my device connected to the Digi ConnectPort by an RJ-45/DB-9M (P/N:76000240) cable.

To be clear I can talk to my device directly from USB/DB-9M and it receives commands fine. As soon as I try to utilize a RealPort COM port devices will no longer recieve a command.

I have been fighting this for over a week now so any input or advice will be greatly appreciated. :)
asked Nov 13, 2020 in Realport by Evil-Knievel-Weevil New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
Did you check the cabling and pin-out?
or you contact Tech.Support@digi.com with your ConnectPort serial number for help.
answered May 6 by User143 Community Contributor (128 points)