Home/Support/Support Forum/XBee Pro S2C not working on Grove test boards.
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

XBee Pro S2C not working on Grove test boards.

0 votes
Just getting started here...

I have a Grove test board that works with XCTU 6.5.4. and XBee Pro S39 boards. If XCTU does not connect properly (ACTION REQUIRED screen pops up)I use the reset button on the Grove board and the radios then come up. Tested with multiple radios.

I just received several 2.4GHz S2C boards and they do not come up in XCTU on the same Grove boards. I get the ACTION REQUIRED screen and when I press the reset nothing happens. I tried the discovery on both the defaults and the all bauds and all Flow Controls selected and I still do not detect the boards.

Are the S2Cs incompatible with the Grove boards?

Thanks for any help
asked Nov 30, 2020 in Other/Legacy by DHuff New to the Community (1 point)

Please log in or register to answer this question.

2 Answers

0 votes
What is the full part number of the XBee S2C modules that are having issues?
answered Nov 30, 2020 by mvut Veteran of the Digi Community (14,777 points)
0 votes
Part number is XBP24CZ7WITB003
answered Nov 30, 2020 by DHuff New to the Community (1 point)
This is a Programmable radio. You need to load on an application on the FreeScale processor before you can talk to the RF processor.
...