Home/Support/Support Forum/cmdline for enableing core dump
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

cmdline for enableing core dump

0 votes
I have imx6ul sbc connector board running kernel version 4.1.39-dey+gf1810a3
Currently the cmdline:
console=ttymxc4 cma=96M mtdparts=gpmi-nand:3m(bootloader), ... rootfstype=ubifs rw quiet

I am not sure to add something like crashkernel=50M rootwait etc. to enable core dump for debugging program crashing.

Or some other ways or tools for crashing debugging?

Thank you,

asked 5 days ago in Linux by dzhou New to the Community (6 points)

Please log in or register to answer this question.

1 Answer

0 votes
please take a look at this page:
it should answer your question
answered 4 days ago by LeonidM Veteran of the Digi Community (3,862 points)
Hi Leonid,

Thank you for your answer and help.
I have generated a core file, but for imx6ul, how to analyze the core file. It seems to me that it needs gdb executable, but I found no gdb program under sysroots/x86_64. Is there a configuration that needs to be bitbaked?

Best Regards,

I found arm-dey-linux-gnueabi-gdb under the sysroots

Hi David,
Yes, that's the one.
Hi Leonid,
I found that the binary executable has to be built in debug. If it is release build without debug info, the gdb shows nothing from the core dump file.
Or I missed something.
The debug build makes executable very big, and there no room or space to dump core.
I am not sure there is a workaround.
Thank you,
do not boot from flash, use TFP/NFS instead, then your rootfs will be a folder on your host Ubuntu