Hello, I have a problem with my XBee S1 and I need quick help, please.
i have XBee s1 put on Wireless proto shield, and I connect this board with Further esp32 as following:
DND -> GND
TX -> TX
RX -> RX
VCC -> 3V
+ the reset and ground of esp32 together.
when I am trying to discover the XBee by XCTU IT DOESNT SEE it.
even when Iam trying to recover the firmware is giving me an error message
"- Looking for active bootloader... [ERROR]
There is not an active bootloader in the module.
- Resetting and entering bootloader... [ERROR]
PutData1: Sent only 0 of 1 bytes
There is not an active bootloader in the module."
I tried to reset it by connecting the reset with a ground of XBee during the recovery process but still can find it.
what I can do, please.