Home/Support/Support Forum/What are the actual baud rates of the Series 3 module?
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

What are the actual baud rates of the Series 3 module?

0 votes
The baud rate of the Series 1 module was off a bit (e.g., 115200 was actually 111111) -- this was not a problem for me because I use a soft UART. Does this same error exist in the Series 3 module?
asked Mar 1, 2021 in Other/Legacy by JonnyMac New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
I would suggest reading over the hardware manual.Page 7 has some of what you want to know.

answered Mar 1, 2021 by mvut Veteran of the Digi Community (15,413 points)
Page 7 has NOTHING of what I want to know, so let me ask again: What is the actual versus stated baud rates for the Series 3 module? For example, this is the list of constants I've used in the past with Series 1 devices.

  BR_9600  =   9_615
  BR_19K2  =  19_230
  BR_38K4  =  38_461
  BR_57K6  =  58_823
  BB_115K2 = 111_111
The XBee 3 is not the same as the XBee S1. The S1 used a fixed clock rate where by the XBee 3 does not. As such, its actual baud rate is considerably more accurate than the old S1 was.   If you want to know more, then I would suggest submitting a support case by sending an email to tech.support@digi.com