I wonder if there was a development board featuring the original Rabbit 2000 (i.e. not the Rabbit 2000A or later) that has memory that requires wait states.
I do have the Rabbit 2000 TCP/IC development kit, which features an original Rabbit 2000. It is clocked at 18.4 MHz, which if I read table 15-2 in the Rabbit 2000 user manual correctly, means that the K6T1008C2E-70 SRAM and V29C51002T-90 Flash on the board are just fast enough to operate without wait states.
The 18.4 MHz crystal is also too fast to use the clock doubler to get into the range where wait states would be required (as the maximum clock speed the clock doubler can generate is 30 MHz).