Home/Support/Support Forum/UART interrupt

UART interrupt

0 votes
Hi. We are working with the Digi Xbee Cellular 3 LTE-M/NB-IoT with micropython. We are unable to configure the interrupt for the uart or any other interrupt. Aparently micropython has no support for this. Wath exactly has the Xbee that gives it this MCU capabilities? I mean, can't we program it using plain C? Thanks in advance.
asked May 28 in MicroPython by mariano90 New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes

You are correct in finding that MicroPython on Digi XBee devices do not support hardware interrupts.

Digi XBee 3 devices (and XBee Cellular) are not exactly end-user-programmable microcontrollers in the way you might be thinking (in the sense of, I bought an MCU, I'll write some firmware and flash it on the hardware). You cannot write code on these modules using C. MicroPython was added to these devices to enable edge intelligence, as described in this post: https://www.digi.com/resources/examples-guides/micropython-examples-for-edge-computing-part-1

If you have some product design in mind where deeper hardware integration with MicroPython is needed, please reach out to Digi sales.
answered May 28 by tckr Veteran of the Digi Community (514 points)
Thanks for your reply. Have a nicee day