Home/Support/Support Forum/libdigiapix i2c write
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

libdigiapix i2c write

0 votes
Hi Im trying to use the libdigiapix I2C API to write to a register in a slave device.

Looking at the documentation here: https://www.digi.com/resources/documentation/digidocs/embedded/dey/3.0/cc6ul/yocto_r_apix-i2c.html I can see that there is an i2c_write function and an i2c_transfer function.

The write function lets you specify the slave address but not a register address on the slave device youre writing to, while the transfer function lets you specify a register value on the slave to read from/write to, but I cant see how you can pass a value to write to said register with this function.

For example, I have a slave device at address 0x68, with an 8 bit register at address 0x14 that I need to write an 8 bit value to to set/clear certain bits. Is it possible to even do this with either of these library functions?
asked Jul 7 in Linux by cstanton New to the Community (1 point)
recategorized Jul 7 by rmaroun

Please log in or register to answer this question.

...