Home/Support/Support Forum/Issue when trying to configure several TransPort peers using IKEv2 VPN Tunnel to a Cisco Responder
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Issue when trying to configure several TransPort peers using IKEv2 VPN Tunnel to a Cisco Responder

0 votes
Hi all,

We followed the Application Note 58 to establish an IKEv2 VPN Tunnel Between a TransPort router WR44 and a Cisco Responder. It worked well when using only one peer, but if we configure another TransPort router WR44 , the SAs are not beeing established, the CISCO responder started creating several SAs and deleting them a few seconds later. We believe there is some inconsistency with the other TransPort router WR44 which already have a SA established with the responder. We configured both Transport router WR44 the same, according to AN 58. Does the AN 58 apply to the configuration of several TransPort WR44 peers with the CISCO responder or just with one peer? How can we deploy several TransPort WR44 IKEv2 VPN tunnel peers with the Cisco Responder?

Thanks in advance,
Best regards,

Felipe1987
asked Aug 5 in Digi TransPort Cellular by Felipe1987 New to the Community (0 points)

Please log in or register to answer this question.

...