Home/Support/Support Forum/XBee DigiMesh sleep synchronisation does not work with encryption enabled

XBee DigiMesh sleep synchronisation does not work with encryption enabled

0 votes
Hi,

I'm trying to use the XBee 3 DigiMesh with sleep synchronisation. I can set up some modules on the same channel and PAN ID and they synchronise perfectly. But if I enable Encryption (EE=1) and assign the same key to the modules, synchronisation does not occur. I have tried this multiple times, and can see the modules synchronise/fail to synchronise just by changing the encryption setting between Enabled and Disabled.

Is this a known limitation of the sleep synchronisation feature of DigiMesh, am I doing something wrong, or is there an unknown bug?

Thanks,

Chris
asked Aug 10 in DigiMesh Proprietary Mesh Networking by chris.shaw New to the Community (2 points)

Please log in or register to answer this question.

1 Answer

+1 vote
 
Best answer
Chris,

I would suggest you contact Digi Support by sending an email to tech.support@digi.com regarding this issue. Make sure to include the exact steps necessary to reproduce the issue including ALL settings used on both modules.
answered Aug 10 by mvut Veteran of the Digi Community (14,807 points)
selected Aug 11 by chris.shaw
...