I have seen a similar question for 802.15.4, but could not find answer for Zigbee network.
My question is, for an XBee 3 Pro Zigbee configured as an End Device (SM=4 Cyclic Sleep), if the coordinator loses power for several minutes or hours so is not accessible when the End Device wakes from cyclic sleep, then the Coordinator is powered again and has started a network again, can the End Device rejoin the network next time it wakes from sleep?
The Coordinator in my case is Digi XBee Gateway (Ethernet + WiFi), from the XBee Zigbee Cloud Kit.
So far, I have found that the End Device does not rejoin the network. I want to avoid turning End Device's battery off and on to make it join the network after Coordinator restarted (which works), because End Device is in an inaccessible place.
If this is possible, what options do I need to change on the End Device or Coordinator? XBee 3 Pro Zigbee is running latest firmware (100D).