Home/Support/Support Forum/Connect ME 9210 ethernet negotiation loop
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Connect ME 9210 ethernet negotiation loop

0 votes
We use a Spellman unit with a Digi Connect ME 9210 and have ethernet connection issues when using a Siemens Siemens xb005g G-bit switch.

In the video below you can see how the unit starts looping after a power cycle and recovers after unplug the Ethernet cable for a couple of seconds.
https://www.ans-net.nl/spellman/2021-09-09%2011.37.44.mp4

Before there was a Digi Connect ME unit on the boards and we have never had this problem with the old units.

Any hint on how to debug this problem or a solution for this problem.

Benno
asked Sep 17 in NET+OS by Benno New to the Community (2 points)
Extra info it might be that the watchdog triggers because this is a gigabit switch. Don't know if this is an option.

Please log in or register to answer this question.

2 Answers

0 votes
what firmware version do you have on the module?
You might want to open a support case by sending an email to Tech.Support@digi.com
answered Sep 19 by LeonidM Veteran of the Digi Community (4,359 points)
0 votes
This is the firmware version.

NET+OS 7.5.2.2

Benno
answered Sep 20 by Benno New to the Community (2 points)
...