Home/Support/Support Forum/Cannot connect to anywhereusb hub after client machine reboot
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Cannot connect to anywhereusb hub after client machine reboot

0 votes
After client machine reboot it cannot connect to USB hub. All other client machines are connecting fine untill we reboot any of them.
In anywhere usb console log I see these messages for this specific client machine:

10.20.2.100 - DIGI AnywhereUSB24 (firmware ver is latest 21.5.56.106)
10.20.1.10 - ClientPC



ep 23 12:49:24 DigiUSBMDC01 kernel: DROP (filter): IN=bond0 OUT= MAC=00:40:ff:81:fe:f0:6c:ab:05:b7:9c:be:08:00 SRC=10.20.1.10 DST=10.20.2.100 LEN=40 TOS=0x00 PREC=0x00 TTL=128 ID=29396 DF PROTO=TCP SPT=62437 DPT=18574 WINDOW=0 RES=0x00 ACK RST URGP=0
Sep 23 13:01:22 DigiUSBMDC01 kernel: DROP (filter): IN=bond0 OUT= MAC=00:40:ff:81:fe:f0:6c:ab:05:b7:9c:be:08:00 SRC=10.20.1.10 DST=10.20.2.100 LEN=40 TOS=0x00 PREC=0x00 TTL=128 ID=29400 DF PROTO=TCP SPT=56095 DPT=18574 WINDOW=0 RES=0x00 ACK RST URGP=0

Telnet and ping to anywhere device is ok.
Please help.
asked Sep 23 in USB Serial by anton.k New to the Community (0 points)

Please log in or register to answer this question.

...