Home/Support/Support Forum/unable to flash i.mx8m nano
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

unable to flash i.mx8m nano

0 votes
Hi ,

I have recently purchase a evk for i.mx8m nano platform.
Trying to bring up the board following this : https://www.digi.com/resources/documentation/digidocs/embedded/dey/3.2/cc8mnano/yocto-gs_t_program-fw

The uuu script is waiting infinitely for the USB device detection , even though rules step has been done correctly also device is in fastboot mode.

Not sure what is the problem. Still suspecting the u-dev rules, but was not able to find anything there too.
asked 5 days ago in Linux by npal New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
Does it work if you use a microSD card to install the firmware directly in the target?

Have you verified that the cable you are using is working?
answered 5 days ago by Campbell Veteran of the Digi Community (840 points)
Hi ,
Thanks for answer.
It boots successfully via SD card. I am pretty sure I am using molex cable provided in the Kit. Still cannot boot over USB.
...