Home/Support/Support Forum/ZHA and xbee 3 pairing problems
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

ZHA and xbee 3 pairing problems

0 votes
I'm trying to pair a XBee 3 as a router with ZHA using a conbee 2 as the coordinator. However, the interview process starts and never finishes. I see the following logs during the process.
Code:
[0x0000:zdo] ZDO request ZDOCmd.Mgmt_Permit_Joining_req: [60, <Bool.false: 0>] Device 0xad53 (00:13:a2:00:41:c8:0c:1e) joined the network Device 00:13:a2:00:41:c8:0c:1e changed id (0xd3cf => 0xad53) [0xad53:zdo] ZDO request ZDOCmd.Device_annce: [0xAD53, 00:13:a2:00:41:c8:0c:1e, 142] [0xad53] Requesting 'Node Descriptor' Tries remaining: 2 [0xad53] Node Descriptor: NodeDescriptor(byte1=1, byte2=64, mac_capability_flags=142, manufacturer_code=4126, maximum_buffer_size=82, maximum_incoming_transfer_size=255, server_mask=11264, maximum_outgoing_transfer_size=255, descriptor_capability_field=0, *allocate_address=True, *complex_descriptor_available=False, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False, *is_valid=True, *logical_type=<LogicalType.Router: 1>, *user_descriptor_available=False) [0xaaaf] Discovering endpoints Tries remaining: 3 [0xaaaf:zdo] ZDO request ZDOCmd.IEEE_addr_req: [0x0000, 0, 0] Tries remaining: 2 Tries remaining: 1 [0xaaaf] Failed to discover active endpoints

I can see that it's trying but for some reason it's failing. Any ideas?
asked Nov 1, 2021 in Python by Broilin New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
The ZDO request you are sending is invalid.
answered Nov 1, 2021 by mvut Veteran of the Digi Community (14,881 points)
...