Home/Support/Support Forum/IO Expansion Connector for ConnectCore iMx6ul SBC Pro
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

IO Expansion Connector for ConnectCore iMx6ul SBC Pro

0 votes
Hi
I have ConnectCore SBC Pro iMx6ul board. In the hardware reference manual:
In both ds-cc-6ul-sbc-pro.pdf and the hardware reference manual PDF documents, I have hard time to figure out IO Expansion J27 for two CAN ports.

In the hardware reference manual:

The two CAN ports are available on a 6-pin, 1.25 mm pitch expansion connector. The following table shows the pinout of the CAN expansion connector (J27):

Which connector is J27?

There are two 14-pin connectors. Are they IO-Expansion Connectors?

Thank you,
David Zhou
asked Feb 4 in Embedded Devices by dzhou New to the Community (7 points)

Please log in or register to answer this question.

1 Answer

0 votes
I found the CAN connector on the Board.
Thank you
answered Feb 7 by dzhou New to the Community (7 points)
...