Home/Support/Support Forum/IO Expander - Firmware Update
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

IO Expander - Firmware Update

0 votes
Hi,

I have ConnectCore SBC 6ul pro board.
sysinfo shows:

|| MCA | HW_VERSION=1 FW_VERSION=0.12
|| I/O Expander | HW_VERSION= FW_VERSION=

It seems that IO expander firmware was not programed.
But on your web site: https://www.digi.com/resources/documentation/digidocs/embedded/dey/3.2/cc6ul/yocto_r_io-exp-firmware-update

Digi programs firmware inside this chip on the ConnectCore 6UL SBC Pro boards

I downloaded firmware file: 82004089_A.bin

Is this file the bootloader only? If no, where can I download bootloader for the IO expander? Do you have .elf file format available?

Thank you
David
asked Feb 4 in Embedded Devices by dzhou New to the Community (7 points)

Please log in or register to answer this question.

3 Answers

0 votes
If firmware is not initially programmed, then in needs to be programmed via JTAG:
https://www.digi.com/resources/documentation/digidocs/embedded/dey/3.2/cc6ul/yocto_r_io-exp-firmware-update.html#program-io-expander-firmware-with-jtag-debugger

or you can RMA the board and Digi will program it for you.
answered Feb 9 by LeonidM Veteran of the Digi Community (4,457 points)
0 votes
i think this is the only bootloader
answered Feb 10 by sipan New to the Community (5 points)
0 votes
You need to uninstall any previous versions of microsoft365.com/setup including 2007, 2010, 2013, and/or 2016. If you do not uninstall previous versions of Microsoft Office and you install Office 365 your computer will not run any program of Office 365 properly.To access these free web apps, just head to and sign in with a free Microsoft account.
answered Feb 10 by zareen2727 New to the Community (1 point)
...