Home/Support/Support Forum/Connectcore 6UL can't reboot but can work by Power on
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Connectcore 6UL can't reboot but can work by Power on

0 votes
We use Connectcore 6UL
We find that the board can work after Power on.
But when type "reboot" under console (linux system) ,only display "Rebooting......"
Under uboot system type "reset" under console ,only display " resetting...."
Can give some information about this question ?
Hardware or Software ?
asked Aug 4 in Linux by steelen New to the Community (1 point)

Please log in or register to answer this question.

2 Answers

0 votes
please program stock images via the procedure described here
https://www.digi.com/resources/documentation/digidocs/embedded/dey/3.2/cc6ul/yocto-gs_t_program-fw

This will reprogram u-boot and reset env to defaults.
Also does reboot command from u-boot work?
If this fails, open a support ticket to RMA the board.
answered Aug 5 by LeonidM Veteran of the Digi Community (4,454 points)
0 votes
Problem Solved
N20 pin can't be used as ENET_PWR control
We changed it´╝îeverything is ok
answered 4 days ago by steelen New to the Community (1 point)
...