Home/Support/Support Forum/Xbee digital output stage

Xbee digital output stage

0 votes
Good morning,
I would like to know how is the output stage of the output pins of modules Xbee PRO S2C and Xbee-3.
Particularly, I'd like to know if a pin configured as a GPIO digital output is driving the load on that pin to high level or low level thorough a low impedance. Or if it is open collector/drain or anything else.
An electrical scheme of the digital outputs could be certainly useful for me.
Or perhaps you can indicate where I can find this information in the existing documentation (I tried but I didn't find it!).
Thank you for the attention and best regards,
GF
asked Sep 19 in XBee3 by guiferra New to the Community (4 points)

Please log in or register to answer this question.

1 Answer

0 votes
I would suggest looking at the hardware reference manual at https://hub.digi.com/support/products/digi-xbee/digi-xbee3/?path=/support/asset/xbee3-hardware-reference-manual/

Generally you connect the radio to a device that has an open collector.
answered Sep 20 by mvut Veteran of the Digi Community (15,413 points)
...