Home/Support/Support Forum/How to achieve the throughput in SX868 datasheet
New and improved user forum site coming soon

How to achieve the throughput in SX868 datasheet

0 votes
I'm using two SX868 modules with XCTU to perform a throughput test. The result is around 10 kbits/s with it in high data rate mode, but the datasheet suggests that it should be possible to achieve 32kbits/s. I have tried it at different ranges, and the throughput is the same regardless of range. How can I achieve the throughput in the datasheet?
asked Nov 17 in RF Solutions and XBee by cac New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
I don't know what settings you are using but I would suggest the following:
On both
DL1 = SL2
DH1 = SH2
TO = 0x40
BD = 7
MR = 0
MT = 0
RR = 0
answered Nov 17 by mvut Veteran of the Digi Community (15,515 points)
Thank you.  I have tried those settings and the throughput is now around 20kbits/s. A bit improvement, but still short of the 32kbits/s in the datasheet.
the 32kbos is under ideal circumstances in a lab.
...