Unique Default Password Product Information

Below is the list of Digi products that require a unique password to log in to the device as well as to register the device on Digi Remote Manager.

List of products where a unique password is required to login to the device and be added to Remote Manager (as of 07/01/2019):

  • LR54
  • WR54
  • WR64
  • IX14
  • EX15
  • Connect IT Family
  • AnywhereUSB Plus Family

List of products where an install code is needed to add the device to Remote Manager but use a common password (as of 07/01/2019):

  • WR11
  • WR21
  • WR31
  • WR44R/RR

Note: SarOS routers will require a unique password by end of 2019 to comply with California Law SB-327.

List of products where no install code is needed to add the device to Remote Manager and use a common password (as of 07/01/2019):

  • ConnectPort TS Family
  • ConnectPort LTS Family
  • ConnectPort X Family
  • XBee Gateway
  • Connect ES Family
  • Connect WS Family
  • Connect WAN Family
  • AnywhereUSB (G2)


List of products that do not support Remote Manager and use a common password (as of 7/01/2019):

  • ConnectPort LTS Family*   
  • Digi Passport*
  • Digi CM
  • Connect SP
  • PortServer TS
  • Digi One (SP/IA/IAP)


* User required to change the default password on initial login

Last updated: Oct 03, 2023

Recently Viewed

No recently viewed articles

Did you find this article helpful?