The following example shows how to create a task on Digi’s Device Cloud to change the Remote Management Server Address in a TransPort.
Log into Device Cloud
Click on
Device Management > Schedules and then click
New Schedule
Click
Start WalkthroughType in the description at the top of the screen for the task
On the left menu, select
Command Line InterfaceFor the first command, enter
cloud 0 server my.devicecloud.comOn the left menu, select
Command Line Interface, again
For the second command, enter
config 0 saveallThen click
Schedule at the bottom right hand corner

Either select
Immediate or
Future to schedule when you wish to apply this change
If you choose
Future, you will need to use the drop down buttons to specify the date and time and then you will see the scheduled job on the next screen.
If you choose
Immediate, it will simply complete the job.
You will need to select the devices you wish to apply these changes to. If selecting more than one, use the “Ctrl” button to select these.
Select
Run Now at the bottom of the screen if you choose
Immediate or
Schedule if you choose
Future.

Here are the results for a scheduled job.
After the scheduled event, you can check to see if it performed by going to
Device Management > Operations. You should be able to see if it successfully completed or not. You may also click on Operation Details for each individual device.

You can also see the changes in each individual device by going to
Device Management > Devices, selecting a particular device by double clicking on it, click on
Configuration, Remote Management, Remote Manager, Remote Manager Config, then check the
Connect to Device Cloud server. At first you will see the previous server name, but if you click
Refresh at the bottom of the page, it will update.
Last updated:
Mar 22, 2019