x

Knowledge Base

What would you like to know?

What are the differences between the 9XStream and the 9XCite modules? Here is a brief table highlighting the differences: 9XCite 9XStream Output power 1mW 100mW Input vol... https://www.digi.com/support/knowledge-base/9xstream-vs-9xcite Jul 06, 2017
The predicted Mean Time Between Failure of the 9XStream module is 700,000 hours. This is a computed prediction, not a field tested result. The computation takes into account the life expectancy of ... https://www.digi.com/support/knowledge-base/what-is-the-mean-time-between-failure-mtbf-for-the Jul 06, 2017
Communication distance is determined by four factors: Output power, recieve sensitivity, Antenna systems and the environment. For the 9XStream radio modems Output power is fixed at 20dBm (100m... https://www.digi.com/support/knowledge-base/expected-communication-distance-of-9xstream-radio Jul 06, 2017
To determine whether you should use 900 MHz or 2.4 GHz RFd2d technology for your products you need to answer the following: What is the maximum range your product needs to communicate? Will y... https://www.digi.com/support/knowledge-base/application-note-900-mhz-vs-2-4-ghz-in-xstream-rad Jul 06, 2017
Question:I am considering using a 9XStream board in a wireless IO application. I wish to mount the board in a ''''daughter board'''' fashion ie. piggy backing off the main board, will I have any pr... https://www.digi.com/support/knowledge-base/electrical-noise-interference-from-the-rf-module Jul 06, 2017
The sample commands listed in this document represent all of the user-defined parameters in the 9XStream and 24XStream wireless modules up to firmware version 4.29. Relevant FilesCommand Descrip... https://www.digi.com/support/knowledge-base/command-description-document-v4-29 Jul 06, 2017
Each Digi radio modem uses as little of the available RF spectrum as possible so as to minimize susceptibility to interference from other RF systems as well as to minimize the impact of Digi transm... https://www.digi.com/support/knowledge-base/frequency-usage-table-by-products Jul 06, 2017
Digi products are known for extreme reliability and robustness even in the harshest environments. Each product is thoroughly tested to ensure outstanding performance in the real world.ElectroStat... https://www.digi.com/support/knowledge-base/electrostatic-discharge-resistance-specification Jul 06, 2017
Comparing Wave Propagation of 900 MHz and 2.4 GHz FrequenciesTo demonstrate the basic difference in wave propagation of 900 MHz and 2.4 GHz waves, a quick look at path loss is provided. As waves pr... https://www.digi.com/support/knowledge-base/wave-propagation-of-900-mhz-vs-2-4-ghz Jul 06, 2017
Digi radios have been certified for use in Class 1 Division 1 environments by several of our customers. The radio modem was incorporated into a complete system that was then tested and certified to... https://www.digi.com/support/knowledge-base/using-digi-radios-in-hazardous-environments Jul 06, 2017
16 result(s) for 9XStream