x

Knowledge Base

What would you like to know?

This article is specific to AnywhereUSB models that support the multi-host connections (MHC) feature - the AnywhereUSB/5 M and AnywhereUSB/14 as of the time of this writing.Background: @Older Anywh... https://www.digi.com/support/knowledge-base/can-the-default-group-be-changed-on-the-anywhereus Jul 06, 2017
Why are the legacy AnywhereUSB/5 USB ports split up into two groups, in the AnywhereUSB Viewer Utility? @Which of those ports correspond to the 5 physical USB ports? The legacy AnywhereUSB/5 has ... https://www.digi.com/support/knowledge-base/understanding-the-legacy-anywhereusb-5-architectur Jul 06, 2017
The solid Red/Amber System Status LED means the AnywhereUSB is@having issues getting an IP address from a DHCP server.@ This@specific model AnywhereUSB is unfortunately known to have @DHCP issues@ ... https://www.digi.com/support/knowledge-base/legacy-1st-generation-anywhereusb-5-has-solid-red Jul 06, 2017
The option to encrypt the USB traffic of an AnywhereUSB was introduced in the AnywhereUSB driver v3.71 and AnywhereUSB firmware version 1.80. These versions (or newer) must be running to use USB e... https://www.digi.com/support/knowledge-base/about-anywhereusb-usb-encryption Jul 06, 2017
Legacy AnywhereUSB/5: @ You can use the "AwRescue" command-line utility to reset a legacy AnywhereUSB/5 to factory default settings, which simply disables the DHCP client and gives the unit t... https://www.digi.com/support/knowledge-base/anywhereusb-factory-reset-procedure Jul 06, 2017
The maximum password length for AnywhereUSB G2 models (i.e. all models other than the legacy/1st gen AnywhereUSB/5) is 15 characters. @The minimum is 1 character. Passwords are case-sensitive.Un... https://www.digi.com/support/knowledge-base/anywhereusb-g2-minimum-and-maximum-password-length Jul 06, 2017
The legacy AnywhereUSB/5 is the only model AnywhereUSB that is compatible with Windows 2000. @ All other (newer) AnywhereUSB models are incompatible with Windows 2000, and will only work wi... https://www.digi.com/support/knowledge-base/anywhereusb-compatibility-with-windows-2000 Jul 06, 2017
The "No Remote Hubs found" message on the left-hand side of the AnywhereUSB Configuration Utility means the host computer is unable to Discover any AnywhereUSBs on the network. @ The most com... https://www.digi.com/support/knowledge-base/no-remote-hubs-found-message-in-the-anywhereusb-co Jul 06, 2017
Although this information is documented in the respective Installation Guides, here is a summary of what the LED behavior indicates on common Digi USB products:@AnywhereUSB:@@On all model AnywhereU... https://www.digi.com/support/knowledge-base/what-do-the-leds-on-my-usb-product-indicate Jul 06, 2017
Notes:You must have Administrator rights when installing the AnywhereUSB driver.At this time, the current AnywhereUSB driver is v3.91.231, which is compatible with the following Windows Operating S... https://www.digi.com/support/knowledge-base/how-do-i-install-the-anywhereusb-driver-in-windows Jul 06, 2017
28 result(s) for AnywhereUSB%2F5