x

Knowledge Base

What would you like to know?

Overview Many Digi products contain and use the RomPager by Allegrosoft web server technology. It has come to our attention that this embedded web server, which is used for management of our devic... https://www.digi.com/support/knowledge-base/network-products-rompager-evaluation-of-security-v Jul 06, 2017
This article is applicable to 2nd generation AnywhereUSB models - that is, all models other than that legacy / 1st generation AnywhereUSB/5.The CLI command to factory default an AnywhereUSB:boot ac... https://www.digi.com/support/knowledge-base/how-to-factory-default-the-anywhereusb-device-usin Jul 06, 2017
The AnywhereUSB is a network-attached USB 2.0* hub. While theoretically any USB device should work, realistically there are limitations, some of which can be worked around and some of which cannot.... https://www.digi.com/support/knowledge-base/anywhereusb-usb-device-compatibility-list Jul 06, 2017
The short answer to this question is, it depends on the model of the AnywhereUSB, specifically if the model supports the Multi-Host Connections (MHC) feature or not. @ The following AnywhereU... https://www.digi.com/support/knowledge-base/can-multiple-host-computers-connect-to-an-anywhere Jul 06, 2017
This can be done through the Web UI (Web User Interface).@@@ The existing configuration will be saved when the firmware is done.@@ Digi recommends you back the configuration of the AnywhereUSB devi... https://www.digi.com/support/knowledge-base/how-do-i-upgrade-the-firmware-on-the-anywhereusb Jul 06, 2017
Users that typically run into this issue are trying to connect to an AnywhereUSB/5 M or AnywhereUSB/14 through a router, in a Port Forwarding scenario. @The symptom of the problem is that it's not ... https://www.digi.com/support/knowledge-base/unable-to-specify-group-number-in-anywhereusb-conf Jul 06, 2017
This article is applicable to 2nd generation AnywhereUSB models - that is, all models other than that legacy / 1st generation AnywhereUSB/5.The CLI command to configure an AnywhereUSB with a Static... https://www.digi.com/support/knowledge-base/how-to-configure-a-static-ip-address-on-a-anywhere Jul 06, 2017
There is no artificial limit in the AnywhereUSB hardware or software regarding the maximum number of AnywhereUSBs@that can be connected to a single host computer.CPU speed and memory are the limiti... https://www.digi.com/support/knowledge-base/how-many-anywhereusbs-can-a-host-computer-connect Jul 06, 2017
Confirming that an AnywhereUSB is connected and installed is a good first step in troubleshooting AnywhereUSB issues. @For example, if an attached USB device doesn't seem to be detected by Windows,... https://www.digi.com/support/knowledge-base/how-to-confirm-if-an-anywhereusb-is-connected-and Jul 06, 2017
This KB article is intended to provide step by step troubleshooting steps to help diagnose the root cause of this issue, likely a new or existing firmware bug, or a defective hardware.Symptom of is... https://www.digi.com/support/knowledge-base/anywhereusb-system-status-led-blinks-repeating-red Jul 06, 2017
28 result(s) for AnywhereUSB%2F5