COVID-19 Digi Technical Support Response x

Knowledge Base

What would you like to know?

There are a few things that should be done to get a TransPort, with a MC7354 module, working with Sprint.@ Please see below:@1)@You will first need to get the Sprint profile files loaded onto the c... https://www.digi.com/support/knowledge-base/getting-a-mc7354-module-on-a-transport-to-work-wit Jul 06, 2017
Symptom: After installing the RealPort driver on the PortServer (II or TS), the user can successfully connect to the COM port, using a terminal emulator such as HyperTerminal, but gets a login pro... https://www.digi.com/support/knowledge-base/login-prompt-when-connecting-to-terminal-server-s Jul 06, 2017
First determine which unit will be establishing the connection. Here is an example configuration for port 16 on a remote PortServer unit. The following commands are issued from the root prompt of t... https://www.digi.com/support/knowledge-base/how-to-create-a-serial-tunnel-or-bridge-with-digi Jul 06, 2017
IntroductionThis document describes how to recover a Digi Connect ME (9210), EM, @ SP JTAG@less C module (hereafter defined as a module) with a user defined image.These modules however need to be t... https://www.digi.com/support/knowledge-base/how-to-recover-a-digi-connect-wi-me-9210-wi-em-and Jul 06, 2017
1) The Printer: Hardware Flow Control should be used whenever a printer is having buffer overruns, is losing sections of a file, or is having problems with garbled or mis-formatted data. Most prin... https://www.digi.com/support/knowledge-base/how-to-configure-a-portserver-or-digi-one-fami-(1) Jul 06, 2017
Digi International Security Notice TRECK TCP/IP Stack @RIPPLE20@ VU#257161 ICS-VU-035787June 16th, 2020 @The following CVE@s have been assigned to these vulnerabilities:CVE-2020-11896, CVE-2020... https://www.digi.com/support/knowledge-base/digi-international-security-notice-treck-tcp-ip-st Jun 16, 2020
1. Connect the console port on the rear panel of the Digi unit to a serial port on a workstation. Use an Ethernet cable with a DB-9 adapter.2. Set up a terminal emulation program such as HyperTermi... https://www.digi.com/support/knowledge-base/how-do-i-change-a-fips-unit-back-to-standard-mode Jul 06, 2017
The Digi Device Cloud is a@cloud-based device management platform that allows you to connect any device to any application, anywhere. @Device Cloud gives you the tools you need to manage many devic... https://www.digi.com/support/knowledge-base/how-to-create-a-free-5-device-device-cloud-develop Jul 06, 2017
Occasionally a Portserver II may have its memory affected by a brown-out/power outage or a nearby electrical storm. @Symptoms: On powerup, Portserver II displays errors such as b, F, or E4. If us... https://www.digi.com/support/knowledge-base/portserver-ii-e4-error-and-how-to-fix-it Jul 06, 2017
An industrial automation company uses Digi@s Multipoint XPress Ethernet Bridges (XEBs) for SCADA (Supervisory Control And Data Acquisition). Rockwell Automation@s market-standard Allen-Bradley... https://www.digi.com/support/knowledge-base/example-application-using-the-xpress-ethernet-mult Jul 06, 2017
44 result(s) for Connect+IT+16