Knowledge Base

What would you like to know?

Note:@ Digi Connect IT serial ports and serial cable length of run: The RS232 standard requires support for baud rates up to 9600 baud on shielded multicore cable up to 50 feet (15 meters) long. F... https://www.digi.com/support/knowledge-base/digi-connect-it-4-mini-and-digi-connect-it-16-48-r Jan 15, 2020
Please see the ME recovery guide for this:ftp://ftp1.digi.com/support/images/connect/intkit/docs/Connect_Mfg-DiagsMode.pdfIn case you don't have a Digi development board to perform the recovery ... https://www.digi.com/support/knowledge-base/connect-me-s-recovery-instructions Jul 06, 2017
The maximum path length for file names passed to Connect Programmer (connectprog.exe) is 64 characters (at least it is for python uploads).see also Digi Connect Programmer Examples https://www.digi.com/support/knowledge-base/digi-connect-programmer-connectprog-max-path-lengt Jul 06, 2017
The short answer to this question is, it depends on the model of the AnywhereUSB, specifically if the model supports the Multi-Host Connections (MHC) feature or not. @ The following AnywhereU... https://www.digi.com/support/knowledge-base/can-multiple-host-computers-connect-to-an-anywhere Jul 06, 2017
OverviewMany Digi products contain and use the RomPager by Allegrosoft web server technology. It has come to our attention that this embedded web server, which is used for management of our devices... https://www.digi.com/support/knowledge-base/connect-wan-3g-4g-family-rompager-evaluation-of-se Jul 06, 2017
Question: Does the Digi Connect ME 9210@module need to have a JTAG port for the serial connection to work? The production version @does not have a JTAG port.Answer:No, the primary serial port is av... https://www.digi.com/support/knowledge-base/does-the-digi-connect-me-9210-module-need-to-have Jul 06, 2017
When I update partitions from U-Boot on Digi Connect ME 9210, e.g.:CME9210# update linuxTFTP from server xxx; our IP address is xxxFilename 'uImage-cme9210js'.Load address: 0x200000Loading: #######... https://www.digi.com/support/knowledge-base/u-boot-crc-calculation-wrong-when-updating-files-o Jul 06, 2017
Customers using Digi Connect ME 9210 with FIM CAN or ConnectCore 9P9215 with FIM CAN an Digi Embedded Linux DEL-5.7.2 having issues with timings not matching or wrong baudrate settings, as well as ... https://www.digi.com/support/knowledge-base/how-to-get-latest-digi-embedded-linux-fim-can-driv Jul 06, 2017
PortServer II setup:On enter the following commands logged in as "root" on your PortServer II:Configure Port(s): #@ set port range=8 dev=mio #@ set flow range=8 ixon=off ixoff=off rts=... https://www.digi.com/support/knowledge-base/how-do-i-connect-two-lans-together-using-the-p-(1) Jul 06, 2017
The following example shows@the configuration of an@SSL bridge@ using port 4 on two PortServer TS units. To@setup an encrypted serial tunnel using SSL between two PortServer TS units,@first browse... https://www.digi.com/support/knowledge-base/how-to-create-a-ssl-tunnel-between-two-portserver Jul 06, 2017
30 result(s) for Connect+IT+48