x

Knowledge Base

What would you like to know?

Digi Embedded Yocto 1.4 build Linux kernel 3.10 has device tree support and needs updated U-Boot 2013 to boot it.Factory programmed ConnectCore/Card i.MX modules might still have an older U-Boot 20... https://www.digi.com/support/knowledge-base/how-to-program-kernel-3-10-images-to-connectcard-w Jul 06, 2017
MAC addresses are not printed on module's label due to space constraints. Customer needs to: Read MACs from NVRAM Read MAC from barcode on white label of module(If your module has 4 3D barcod... https://www.digi.com/support/knowledge-base/mac-addresses-are-not-printed-on-connectcard-for-i Jul 06, 2017
Description of the problem Occasionally, there are customers complaining ,targets not booting after receiving modules with the latest U-Boot firmware. The only thing they see at the serial por... https://www.digi.com/support/knowledge-base/brown-out-issues-on-connectcard-wi-i-mx28-modules Jul 06, 2017
I tested a CCARDWMX28 with aadk-1.4.0.5 and works fine using the AUART2.The default images have enabled the AUART2(TTL) and works fine with the SerialConsole app using the node /dev/ttySP2.@I’ve co... https://www.digi.com/support/knowledge-base/enabling-additional-serial-ports-in-android-aadk-f Jul 06, 2017
Digi Embedded Linux 5.9 default Linux build for ConnectCard (Wi-)i.MX28 by default has not configured any graphical capabilities.In order to run the Qt example applications with the 7" LCD as used ... https://www.digi.com/support/knowledge-base/running-qt-sample-application-on-wi-i-mx28-with-fu Jul 06, 2017
KRACK Patch Status for affected Digi products@ Product Family/ProductPatch statusLocation of PatchCellularDigi Transport WR41November, 2017https://www.digi.com/support/productdetail?pid=5500@typ... https://www.digi.com/support/knowledge-base/krack-patch-status Dec 05, 2017