Knowledge Base

What would you like to know?

Rescue partitions support has to be enabled in Uboot. Create a Uboot Project and in configure, make sure that Rescue Partition Mechanism is selected in U-Boot Configuration @ U-Boot Settings. Bu... https://www.digi.com/support/knowledge-base/how-to-update-rescue-partitions-on-connectcore-wi Jul 06, 2017
If U-Boot in flash fails to boot @ NO output is being observed on the serial port during Power up, you can try recovery using a MicroSD Card.For the recovery you need:GA JSK Development board.A ... https://www.digi.com/support/knowledge-base/how-to-recover-the-connectcore-wi-i-mx51-ga-module Jul 06, 2017
If U-Boot in flash fails to boot @ NO output is being observed on the serial port during Power up, you can try recovery using a MicroSD Card.For the recovery you need:GA JSK Development board.A Mic... https://www.digi.com/support/knowledge-base/how-to-recover-the-connectcore-wi-i-mx51-ga-mo-(1) Jul 06, 2017
KRACK Patch Status for affected Digi products@ Product Family/ProductPatch statusLocation of PatchCellularDigi Transport WR41November, 2017https://www.digi.com/support/productdetail?pid=5500@typ... https://www.digi.com/support/knowledge-base/krack-patch-status Dec 05, 2017