COVID-19 Digi Technical Support Response x

Knowledge Base

What would you like to know?

ConnectCore wi-i.mx53 module is internally bootstrapped to boot from FLASH. Additional external circuitry is required only if other user-selectable @boot options are required.The CCWMX53 module has... https://www.digi.com/support/knowledge-base/bootstrapping-options-on-connectcore-wi-i-mx53-mod Jul 06, 2017
To enable i2c-2 in Linux kernel for Android you may use the following patches:@diff --git a/arch/arm/mach-mx5/mx53_ccwmx53js.c b/arch/arm/mach-mx5/mx53_ccwmx53js.cindex 86fef8580197..29f1468a1ea1 1... https://www.digi.com/support/knowledge-base/how-to-enable-i2c-in-linux-kernel-for-android-for Jul 06, 2017
The commercial temperature range CC6 variants support only -25°C / 85°C with Sandisk eMMC.The industrial temperature range CC6 variants support -40°C / 85°C with Micron MTFC4GACAAAM-4M IT flash.Dig... https://www.digi.com/support/knowledge-base/emmc-flash-chips-used-on-connectcore-i-mx6 Jul 06, 2017
KRACK Patch Status for affected Digi products@ Product Family/ProductPatch statusLocation of PatchCellularDigi Transport WR41November, 2017https://www.digi.com/support/productdetail?pid=5500@typ... https://www.digi.com/support/knowledge-base/krack-patch-status Dec 05, 2017
If U-Boot in flash fails to boot @ NO output is being observed on the serial port during Power up, you can try recovery using a MicroSD Card or SD Card.For the recovery you need:*JSK Development bo... https://www.digi.com/support/knowledge-base/how-to-recover-a-connectcore-wi-i-mx53-module-usin Jul 06, 2017
Pre programmed U-Boot on i.MX modules offers Ethernet = tftp, USB (memory stick), maybe slow serial upload, or µSD/SD/MMC card to program your customer U-Boot and operating system firmware into the... https://www.digi.com/support/knowledge-base/how-to-program-custom-firmware-from-microsd-sd-mmc Jul 06, 2017