COVID-19 Digi Technical Support Response x

Knowledge Base

What would you like to know?

Note:@ Digi Connect IT serial ports and serial cable length of run: The RS232 standard requires support for baud rates up to 9600 baud on shielded multicore cable up to 50 feet (15 meters) long. F... https://www.digi.com/support/knowledge-base/digi-connect-it-4-mini-and-digi-connect-it-16-48-r Jan 15, 2020
Please see the ME recovery guide for this:ftp://ftp1.digi.com/support/images/connect/intkit/docs/Connect_Mfg-DiagsMode.pdfIn case you don't have a Digi development board to perform the recovery ... https://www.digi.com/support/knowledge-base/connect-me-s-recovery-instructions Jul 06, 2017
OverviewMany Digi products contain and use the RomPager by Allegrosoft web server technology. It has come to our attention that this embedded web server, which is used for management of our devices... https://www.digi.com/support/knowledge-base/embedded-net-os-modules-rompager-evaluation-of-sec Jul 06, 2017
OverviewMany Digi products contain and use the RomPager by Allegrosoft web server technology. It has come to our attention that this embedded web server, which is used for management of our devices... https://www.digi.com/support/knowledge-base/embedded-nds-rompager-evaluation-of-security-vulne Jul 06, 2017
Telnet to the Digi device/terminal server and@ login as root.@ Change the "dev" setting@to "prn" #@@ set port range=@dev=prn A reboot of the Digi unit should be done when changing this s... https://www.digi.com/support/knowledge-base/when-trying-to-connect-to-a-port-a-connection-refu Jul 06, 2017
Question:Do the Digi XBee modules Support 5V on any of the radios pins?Answer:No, the Digi XBee is a 3V device. Unless otherwise stated in the manual, the Digi XBee modules do not accept 5V on any... https://www.digi.com/support/knowledge-base/5v-interface-and-the-xbee Jul 06, 2017
Unfortunately Digi Connect ME 9210 development kits for Linux: DC-ME-9210-LX are still delivered with old DVD with Digi Embedded Linux DEL-5.2.In order to avoid starting your development with and L... https://www.digi.com/support/knowledge-base/how-to-get-latest-digi-embedded-linux-version-for Jul 06, 2017
If you use timezone settings with LxNETES-2.3 uClinux 2.4.22 ConnectCore 7U (unc20) or Digi Connect ME you might observe that daylight saving time is switched on a wrong day at least in 2012 (maybe... https://www.digi.com/support/knowledge-base/connectcore-7u-unc20-or-digi-connect-me-running-lx Jul 06, 2017
Problem:@ @ We received a question from a customer asking the meaning of the "-B" suffix in part number DC-ME-Y402-S-B. From outside of Digi this information may be hard to acquire.Analysis:@@ @The... https://www.digi.com/support/knowledge-base/what-is-the-meaning-of-b-in-part-number-dc-me-y402 Jul 06, 2017
This can be done through the Web UI (Web User Interface) of the Digi Connect WAN device, either via the Mobile IP or Local IP.@ It's strongly recommended to use the Local IP (default 192.168.1.1) i... https://www.digi.com/support/knowledge-base/how-do-i-upgrade-the-firmware-on-a-digi-connect-wa Jul 06, 2017
22 result(s) for Digi+Connect+50