COVID-19 Digi Technical Support Response x

Knowledge Base

What would you like to know?

Customers using Digi Connect ME 9210 with FIM CAN or ConnectCore 9P9215 with FIM CAN an Digi Embedded Linux DEL-5.7.2 having issues with timings not matching or wrong baudrate settings, as well as ... https://www.digi.com/support/knowledge-base/how-to-get-latest-digi-embedded-linux-fim-can-driv Jul 06, 2017
When using the Digi USB JTAG-Link (P/N: DG-ACC-JLNK)with an older revision of the Digi Connect (Wi-)ME (9210) development board, you might experience failure messages:Could not perform target reset... https://www.digi.com/support/knowledge-base/jtag-link-not-working-with-older-revision-of-devel Jul 06, 2017
Sometimes you need to run a serial terminal program on an embedded device to check from your shell how a connected serial device is answering on characters beeing send to it.Below we describe how t... https://www.digi.com/support/knowledge-base/how-to-test-a-serial-device-connected-to-a-digi-co Jul 06, 2017
When your NET+OS firmware device does not boot anymore and you are trying How to recover a Digi Connect (Wi-)ME (9210), (Wi-)EM and (Wi-)SP JTAG'less C module, you may manage to upload a firmware i... https://www.digi.com/support/knowledge-base/forgot-the-root-password-for-net-os-firmware-can-t Jul 06, 2017
Since 2016 May the Digi JTAG Booster DG-ACC-JBST FS-285 is discontinued and end of life (see PN#160506-06). As a replacement to program flash or debug applications customers may consider the Digi U... https://www.digi.com/support/knowledge-base/jtag-booster-vs-digi-usb-jtag-link Jul 06, 2017
Customer owning a Digi Embedded ConnectCore, Digi Connect ME (9210) or ConnectCard module and asking how to get the customized firmware images, would need to have either Windows Embedded, NET+OS or... https://www.digi.com/support/knowledge-base/windows-or-linux-embedded-license-or-installation Jul 06, 2017
INTRODUCTION This document contains a list of tips that will help people through the trouble of detecting most Digi Ethernet or Wi-Fi devices. Some examples are the Digi Connect ME, EM, SP, WiME,... https://www.digi.com/support/knowledge-base/device-discovery-troubleshooting-tips Jul 06, 2017
Question:I'm working with a Digi Embedded Linux (DEL) ConnectCore/ConnectCard/Connect ME 9210 board having problems to transfer the system to the target. I've been following the command line refere... https://www.digi.com/support/knowledge-base/how-to-transfer-the-system-to-the-target Jul 06, 2017
During write to NOR flash on Digi Connect (Wi-)ME 9210, or ConnectCore (Wi-)9P9215 with Linux you might see similar messages like:@ MTD do_write_oneword(): software timeoutMTD do_write_oneword(): ... https://www.digi.com/support/knowledge-base/mtd-do-write-oneword-software-timeout Jul 06, 2017
OverviewMany Digi products contain and use the RomPager by Allegrosoft web server technology. It has come to our attention that this embedded web server, which is used for management of our devices... https://www.digi.com/support/knowledge-base/rompager-evaluation-of-security-vulnerability-vu-5 Jul 06, 2017
44 result(s) for Digi+Connect+ME