x

Knowledge Base

What would you like to know?

OverviewMany Digi products contain and use the RomPager by Allegrosoft web server technology. It has come to our attention that this embedded web server, which is used for management of our devices... https://www.digi.com/support/knowledge-base/embedded-net-os-modules-rompager-evaluation-of-sec Jul 06, 2017
OverviewMany Digi products contain and use the RomPager by Allegrosoft web server technology. It has come to our attention that this embedded web server, which is used for management of our devices... https://www.digi.com/support/knowledge-base/embedded-nds-rompager-evaluation-of-security-vulne Jul 06, 2017
IntroductionThis document describes how to recover a Digi Connect ME (9210), EM, @ SP JTAG@less C module (hereafter defined as a module) with a user defined image.These modules however need to be t... https://www.digi.com/support/knowledge-base/how-to-recover-a-digi-connect-wi-me-9210-wi-em-and Jul 06, 2017
Since 2016 May the Digi JTAG Booster DG-ACC-JBST FS-285 is discontinued and end of life (see PN#160506-06). As a replacement to program flash or debug applications customers may consider the Digi U... https://www.digi.com/support/knowledge-base/jtag-booster-vs-digi-usb-jtag-link Jul 06, 2017
Socat allows to read/write data from a serial port and forward it through TCP/IP. With this feature you can implement serial to Ethernet or WiFi bridge on a Linux enabled embedded device.Example fo... https://www.digi.com/support/knowledge-base/serial-to-ethernet-or-wifi-bridge-with-linux-socat Sep 22, 2017
When using the Digi USB JTAG-Link (P/N: DG-ACC-JLNK)with an older revision of the Digi Connect (Wi-)ME (9210) development board, you might experience failure messages:Could not perform target reset... https://www.digi.com/support/knowledge-base/jtag-link-not-working-with-older-revision-of-devel Jul 06, 2017
Hardware reference manual http://ftp1.digi.com/support/documentation/90001247_C.pdf statement about RESET:Pulling pin 8 low with an open drain driver will force the module into a hard reset state. ... https://www.digi.com/support/knowledge-base/connect-me-and-me-9210-reset-pin-recommendations Jul 06, 2017
BackgroundAs of January 1, 2020, the California Consumer Privacy Act SB-327 requires all cellular and internet connected devices manufactured after that date to have unique@default@passwords@for@ea... https://www.digi.com/support/knowledge-base/unique-default-passwords-for-digi-products Oct 16, 2019
KRACK Patch Status for affected Digi products@ Product Family/ProductPatch statusLocation of PatchCellularDigi Transport WR41November, 2017https://www.digi.com/support/productdetail?pid=5500@typ... https://www.digi.com/support/knowledge-base/krack-patch-status Dec 05, 2017
During write to NOR flash on Digi Connect (Wi-)ME 9210, or ConnectCore (Wi-)9P9215 with Linux you might see similar messages like:@ MTD do_write_oneword(): software timeoutMTD do_write_oneword(): ... https://www.digi.com/support/knowledge-base/mtd-do-write-oneword-software-timeout Jul 06, 2017
11 result(s) for Digi+Connect+Wi-ME+9210