Knowledge Base

What would you like to know?

Since 2016 May the Digi JTAG Booster DG-ACC-JBST FS-285 is discontinued and end of life (see PN#160506-06). As a replacement to program flash or debug applications customers may consider the Digi U... https://www.digi.com/support/knowledge-base/jtag-booster-vs-digi-usb-jtag-link Jul 06, 2017
WPA2 enterprise Radius authentication e.g. with EAP-TLS is not a matter of the hardware.CC6 and CC6UL hardware should be able to do it.Its a matter of appropriate firmware setup. Digi does not prov... https://www.digi.com/support/knowledge-base/does-connectcore-6-or-connectcore-6ul-support-wpa2 Jul 06, 2017
Sometimes you need to run a serial terminal program on an embedded device to check from your shell how a connected serial device is answering on characters beeing send to it.Below we describe how t... https://www.digi.com/support/knowledge-base/how-to-test-a-serial-device-connected-to-a-digi-co Jul 06, 2017
DEL with kernel 2.6.35.14 or above will support multiple users on target boards. ie: 5.7, 5.8, 5.9 etc.To get user login prompt in Linux boot follow the below :- Create a DigiEL-Kernel/Rootfs/U-... https://www.digi.com/support/knowledge-base/how-do-i-get-a-user-login-prompt-in-digi-embedded Jul 06, 2017
If you use timezone settings with LxNETES-2.3 uClinux 2.4.22 ConnectCore 7U (unc20) or Digi Connect ME you might observe that daylight saving time is switched on a wrong day at least in 2012 (maybe... https://www.digi.com/support/knowledge-base/connectcore-7u-unc20-or-digi-connect-me-running-lx Jul 06, 2017
I can't run applications on my Connect Core Wi9C (CC Wi9C) with my debugger in the Digi ESP. When I try to run an image in the Digi ESP I get a message in the debug window showing the process is te... https://www.digi.com/support/knowledge-base/i-can-t-run-applications-on-my-connectcore-wi-9c-w Jul 06, 2017
Some of the Digi ConnectCore i.MX6 modules, e.g. using FreeScale i.MX6 QuadCore CPU, do have hardware support for High bandwidth Digital Content Protection (HDCP) e.g. for HDMI.If you use this feat... https://www.digi.com/support/knowledge-base/is-a-hdcp-license-needed-for-connectcore-i-mx6 Jul 06, 2017
Customers can get the android sources by filling the form at the below link, once submit the form, A Digi representative will contact you to provide instructions on downloading the Digi Embedded fo... https://www.digi.com/support/knowledge-base/how-to-get-the-android-source-code-for-connect-(1) Sep 05, 2019
When you work with QT's Inter-Process Communication (IPC) and Remote Procedure Calling (RPC) mechanism , ie: D-Bus , you might have faced some errors like shown below:Failed to start message bus:Fa... https://www.digi.com/support/knowledge-base/how-to-run-d-bus-session-bus-on-connectcore-module Jul 06, 2017
The ConnectCore 6 hardware supports up to 7 pulse width modulators (PWM).Digi Embedded Yocto 2.0 firmware supports only the 3 PWMs implemented in the PMIC (1):1) CC6 SBC HRM http://ftp1.digi.com/su... https://www.digi.com/support/knowledge-base/how-many-pulse-width-modulators-pwm-are-available Jul 06, 2017
38 result(s) for Digi+ConnectCore+6%2B