x

Knowledge Base

What would you like to know?

HID (Human Interface Device) style devices and USB hubs are compatible with all model ConnectPort Displays. Devices that typically fall into the HID category are simple input devices such as USB ... https://www.digi.com/support/knowledge-base/what-kinds-of-usb-devices-are-compatible-with-the Jul 06, 2017
When you are using Python callback SCI request, you may receive an error like @Name not registered@ in the response as shown below @do_command target=@rci_callback_example@@ @error ... https://www.digi.com/support/knowledge-base/sci-request-error-name-not-registered-in-device-cl Jul 06, 2017
In order to point a created print queue at a tty device, you will need to perform the following steps: @ 1. Create a generic print queue in AIX for an unused port (This creates an lp device for... https://www.digi.com/support/knowledge-base/how-to-better-manage-digi-created-serial-printer-d Jul 06, 2017
Installing RealPort on an AIX system involves the creation of a service adapter, upon which psuedo-ttys or lps are created for use by serial devices. The name of this service adapter follows the AI... https://www.digi.com/support/knowledge-base/creating-custom-adapter-names-for-aix-realport-ser Jul 06, 2017
NOTE: This example was setup using a Schneider Compact 265 running ProWorxNxT Online Software (v. 2.20) from Schneider.@ Therefore the application section may not apply to you, but may offer some i... https://www.digi.com/support/knowledge-base/modbus-serial-slave-with-proworxnxt Jul 06, 2017
The polling feature on the 9XTend allows the user to poll their remotes in a controlled organized fashion. This feature may come in handy for point to multipoint systems where all of the remotes ar... https://www.digi.com/support/knowledge-base/polling-mode-for-the-9xtend-radio-modem Jul 06, 2017
The polling feature on the XTend allows the user to poll their remotes in a controlled organized fashion. This feature may come in handy for point to multipoint systems where all of the remotes are... https://www.digi.com/support/knowledge-base/polling-mode-for-the-xtend-radio-modem Jul 06, 2017
NOTE: This example was setup using a Schneider Compact 265 running Kepware KepServerEX 4.71.201 -U and Kepware OPC Quick Client 4.30.74 -U. Therefore the application section may not apply to you, ... https://www.digi.com/support/knowledge-base/setting-up-the-digi-one-ia-realport-as-a-modbus-se Jul 06, 2017
Process for Commissioning an XBee cellular module with a Verizon SIM card from Digi InternationalThe directions below are to assist you in an initial set-up for an XBee LTE Verizon module and asso... https://www.digi.com/support/knowledge-base/process-for-commissioning-an-xbee-cellular-module Sep 15, 2017
Update the SMS Long Code within Digi Remote Manager1. Log in to Digi Remote Manager, and navigate to the device list located under Device Management @ Devices<img alt="" src="data:image/png;base64,... https://www.digi.com/support/knowledge-base/how-to-change-the-sms-international-long-code-on-d Oct 22, 2018