Knowledge Base

What would you like to know?

Download the firmware file from our main web site under support.The 2 main methods to upgrade firmware:1.@ Via the web ui.@ System adm-@Firmware upgrade2.@ Via the CLI@ configmenu@@ System adm@@ Fi... https://www.digi.com/support/knowledge-base/how-to-upgrade-the-firmware-on-the-digi-cm-passpor Jul 06, 2017
1. EEPROM - Stores device information such as model code, firmware version, Ethernet MAC addresses.@ These are factory settings and there is no user information. 2. Flash memory - Stores Passport ... https://www.digi.com/support/knowledge-base/memory-locations-on-the-digi-passport Jul 06, 2017
The following loopback pinouts apply to the Digi CM and Digi Passport product lines: RJ45 Looback ======= @ @ @ @ @ @ @ @======= 1 CTS @ @ @ @ @ @ @ @ @ @ 8 RTS 2 DSR and DCD @ @7 DTR 3 RxD @ @ ... https://www.digi.com/support/knowledge-base/pinouts-for-the-digi-cm-and-digi-passport-loopback Jul 06, 2017
@ Web:@ Network – Web server configCLI:@ System admin – CLI configSerial Port:@ Serial Port – Config – AuthenticationPort Access Menu:@ Serial Port – Config – Port Access Menu Config – Authentication https://www.digi.com/support/knowledge-base/authentication-locations-on-the-digi-cm-and-passpo Jul 06, 2017
The following loopback pinouts apply to the Digi CM and Digi Passport product lines: RJ45 Looback ======= @ @ @ @ @ @ @======= 1 CTS @ @ @ @ @ @ @ @ @ @@ 8 RTS 2 DSR and DCD @ @ 7 DTR 3 RxD @ ... https://www.digi.com/support/knowledge-base/what-are-the-pinouts-for-the-digi-cm-passport-loop Jul 06, 2017
Copy the whole config from the CM/Passport to the host you are on:@@@ scp -p -r root@CM/Passport_IP:/tmp/cnf/* .This will copy the whole CM/Passport config to the directory you are currently in (.)... https://www.digi.com/support/knowledge-base/copying-the-digi-cm-passport-config-via-scp Jul 06, 2017
There are four Inactivity timeouts (default is 100 sec) on the Digi CM and Passport:1. @Web interface: @Network-@Web server config-@Login timeout2.@ Serial port: @Serial port-@Config-@”#”-@Host mod... https://www.digi.com/support/knowledge-base/inactivity-timeouts-on-digi-cm-and-passport Jul 06, 2017
From the Digi CM/Passport command line (CLI) type: more /proc/tty/driver/serial_vts https://www.digi.com/support/knowledge-base/how-do-you-check-serial-signals-from-the-digi-cm-c Jul 06, 2017
For authentication:User-NameUser-Password NAS-IP-Address NAS-Port-Id Framed-ProtocolFor accounting:Acct-Status-Type User-Name User-Name NAS-Port-Id Acct-Session-ID Acct-Session-Time Service-Type https://www.digi.com/support/knowledge-base/radius-attributes-supported-by-the-digi-cm-passpor Jul 06, 2017
Follow these steps to setup the Digi CM/Passport console port for dialin access:1. Edit the /usr2/rc.user file and add the following line just above "exit 0":echo 57600 @ /var/run/mgetty.console2. ... https://www.digi.com/support/knowledge-base/how-do-i-access-the-digi-cm-passport-console-port Jul 06, 2017
39 result(s) for Digi+Passport