Knowledge Base

What would you like to know?

==================================================@@@@@@@@@@@@@@@@@@@@@@@@@@@@ typical@@@ @Single Power max@@@ Dual Power max ==================================================Digi Passport 4@@@@@@... https://www.digi.com/support/knowledge-base/heat-dissipation-btu-hr-for-the-passport Jul 06, 2017
The following cable pinout applies for connecting from one port to another port on Digi CM or Digi Passport units: RJ45 @ @ @ @ @ @ @ @ @ @ @ RJ45 ======= @ @ @ @ @ @ @ @======= 1 CTS @ @ @ @ @ ... https://www.digi.com/support/knowledge-base/pinouts-for-connecting-from-one-port-to-another-po Jul 06, 2017
Make sure that Date and Time is set properly on the unit:System admin-@Date @ time https://www.digi.com/support/knowledge-base/after-upgrading-firmware-on-digi-cm-passport-user Jul 06, 2017
@Adding Users.@@@@@@@ useradd -d /tmp [-g groupid ] [-s shellprogram ] [username]@@@@@@@ groupid = Options are: Sys admin, Port admin, or Standard User.@@@@@@@ 500 = Sys admin@@@@@@@ 501 = Port adm... https://www.digi.com/support/knowledge-base/configuring-users-on-the-digi-cm-passport-via-the Jul 06, 2017
SSH clients tested.@@@ Linux via OpenSSH:@@@@@@@ From Linux (client):@@@@@@@ adduser joe@@@@@@@ su joe@@@@@@@ ssh-keygen -t dsa@@@@@@@ This creates file $HOME/.ssh/id_dsa.pub@@@@@@@ On the Digi CM/... https://www.digi.com/support/knowledge-base/using-ssh-with-public-keys-to-the-digi-cm-and-digi Jul 06, 2017
The following examples are to access port 1 at 192.168.1.1:Via SSH:http://192.168.1.1/ssh.asp?port=1https://192.168.1.1/ssh.asp?port=1Via telnet:http://192.168.1.1/telnet.asp?port=1https://192.168.... https://www.digi.com/support/knowledge-base/how-do-i-directly-access-port-s-via-http-https-on Jul 06, 2017
Customers log into the Port Access Menu and are then required to login again to get into the port.@ Customers do not want to have to login a second time.@ There are two ways to accomplish this:1.@@... https://www.digi.com/support/knowledge-base/why-must-i-login-to-the-menu-and-then-again-to-the Jul 06, 2017
This procedure will reset all settings on the unit to the factory defaults. @It is highly recommended the configuration is backed up prior to a factory reset. There are two ways to reset the unit... https://www.digi.com/support/knowledge-base/steps-to-factory-reset-a-digi-cm-or-passport-unit Jul 06, 2017
In the event the configuration data is destroyed or corrupted.@The Digi console server automatically restores a corrupted configuration file system to the factory default settings.@However, if the ... https://www.digi.com/support/knowledge-base/the-digi-cm-digi-passport-and-connectport-lts-disa Jul 06, 2017
The following cable pinout applies for connecting from one port to another port on Digi CM or Digi Passport units: RJ45 @ @ @ @ @ @ @ @ @ @ @ RJ45 ======= @ @ @ @ @ @ @ @======= 1 CTS @ @ @ @ @ ... https://www.digi.com/support/knowledge-base/what-is-the-cable-pinout-for-connecting-from-one-p Jul 06, 2017
38 result(s) for Digi+Passport