x

Knowledge Base

What would you like to know?

Network bridging (/etc/init.d/brmode) on the Passport sets the same IP address to the two interfaces.During normal conditions, only eth0 is working.If a network cable on eth0 is unplugged or if the... https://www.digi.com/support/knowledge-base/how-does-the-network-bridge-option-work-on-the-pas Jul 06, 2017
Each response is going out through the interface where packets are originated.@ That is, the response for packets originating from eth0 is going out though eth0 and the response for packets origina... https://www.digi.com/support/knowledge-base/how-does-the-source-based-routing-option-work-on-t Jul 06, 2017
These are cards tested by Digi and verified to work.@ This does not mean that other cards will fail, we just have not tested them.@Compact Flash Cards:ManufacturerDescriptionModel NameSpecification... https://www.digi.com/support/knowledge-base/which-pc-cards-are-supported-on-the-digi-cm-passpo Jul 06, 2017
1. Connect the console port on the rear panel of the Digi unit to a serial port on a workstation. Use an Ethernet cable with a DB-9 adapter.2. Set up a terminal emulation program such as HyperTermi... https://www.digi.com/support/knowledge-base/hidden-commands-from-the-bios-menu-on-the-cm-passp Jul 06, 2017
The Digi ConnectPort LTS can have the firmware installed using the web interface.@@Install the ConnectPort LTS firmware and the ConnectPort LTS must be rebooted to complete the firmware update.Down... https://www.digi.com/support/knowledge-base/how-do-i-update-firmware-on-digi-connectport-lts-u Jul 06, 2017
Why Telnet to the CommandLine Interface (CLI)?While the Web User Interface (WebUI) of Digi network products is a convenient configuration interface, it typically only covers the most common options... https://www.digi.com/support/knowledge-base/how-to-access-and-capture-output-from-the-commandl Jul 06, 2017
Chrome version 45 and above no longer supports Java.@Some pages within the web UI of the Digi CM and Digi Passport use Java.@ Most notably, the connection page.If you require Java, your only option... https://www.digi.com/support/knowledge-base/chrome-and-java-support Jul 06, 2017
The TransPort LR54 is FIPS 140-2 certified.Other TransPort routers are not FIPS 140-2 certified, they do not meet the FIPS 140-2 criteria.The only other product that we offer that is FIPS 140-2 cer... https://www.digi.com/support/knowledge-base/are-transport-routers-fips-140-2-certified Jul 06, 2017
Digi International Security NoticeApril 14th,2014(Updated 4/18/2014)CVE-2014-0160/ OpenSSL “Heartbleed”OverviewOn April 7th, a critical security vulnerability@(CVE-2014-0160), nicknamed “Heartbleed... https://www.digi.com/support/knowledge-base/digi-international-security-notice-openssl-heartbl Jul 06, 2017
Create a "user" locally on the Digi CM/Passport via the web ui or configmenu. Have this same user in your remote authentication database (RADIUS, TACACS+, LDAP, Kerberos). Assign the u... https://www.digi.com/support/knowledge-base/remote-authentication-to-the-web-ui Jul 06, 2017
37 result(s) for Digi+Passport