x

Knowledge Base

What would you like to know?

When there is a mismatch in python version for the selected sample project and selected device, you will receive error - @python version incompatibility@To avoid this error, after you select sample... https://www.digi.com/support/knowledge-base/python-version-incompatibility-error-in-digi-esp-f Jul 06, 2017
The transport supports IGMP and static multicast routes. However it is not currently possible to receive multicast messages from python. This feature may be added in the future however. https://www.digi.com/support/knowledge-base/ip-multicast-on-transport-in-python Jul 06, 2017
python.org - for training materials from the creators of the language.Digi Python Wiki - specializing in python and how it applies to Digi products:http://www.digi.com/wiki/developer/index.php/Spec... https://www.digi.com/support/knowledge-base/digi-python-learning-recommendations Jul 06, 2017
This article contains a number of links useful for development with Digi@s RF Gateway and XBee productline. Digi RF Gateways have an inherent Python interpreter, so a key focus has been made on av... https://www.digi.com/support/knowledge-base/digi-xbee-rf-gateway-and-python-development-resour Jul 06, 2017
When Python Standard Library is not loaded on digi devices running NDS firmware, you will get the error no module named OS, Follow the below steps to overcome this error. Download the file Pytho... https://www.digi.com/support/knowledge-base/no-module-named-os-error-in-digi-esp-for-python Jul 06, 2017
When you receive this import error, check whether the zigbee module is uploaded to gateway. If the zigbee module is not present, follow the below steps, Download the zigbee module for CP-X gate... https://www.digi.com/support/knowledge-base/import-error-no-module-named-zigbee-while-executin Jul 06, 2017
The XBee Cellular module supports Python directly within its firmware. To enable this function, set the AT AP command to a value of 4 @carriage return@. Then enter ATCN to exit command mode. @Enter... https://www.digi.com/support/knowledge-base/xbee-cell-and-python Sep 28, 2017
When we run our script on auto start using the correct method that you just supplied, any print statements present in the script send their output to the serial port for some reason?How do we turn ... https://www.digi.com/support/knowledge-base/viewing-python-program-output-when-autolaunching-i Jul 06, 2017
You can setup this feature from the web interface.Open the web interface of the Transport.@ Go to: Homepage -@ Configuration - System -@ General -@ Autorun Commands.@@Under the 'command' section, e... https://www.digi.com/support/knowledge-base/how-do-i-launch-python-scripts-automatically-from Jul 06, 2017
@1) Upload the script on the TransPort via WEB GUIIn the WEB GUI, browse to Administration-File management @ File editor, click in the Filename field (where there is "--edit--"):Type a name for the... https://www.digi.com/support/knowledge-base/how-to-upload-and-run-python-scripts-in-transport Jul 06, 2017
44 result(s) for Python